-
Primary Crushing Equipment For MinesFeed particle size: ≤ 800mmread more
Maximum feed size: ≤ 500mm
Processing capacity: 60-800t/h
Discharge port range: 40-3200mm -
Impact CrusherFeed particle size: ≤ 800mmread more
Processing capacity: 60-900t/h
Feed inlet size: 400 × 730-1260mm × 2040mm
Discharge port range: 20-60mm -
Jaw CrusherFeed particle size: ≤ 800mmread more
Maximum feed size: ≤ 500mm
Processing capacity: 60-800t/h
Discharge port range: 40-3200mm -
Sand Making Equipment For Construction AggregatesIn the construction industry, high-quality construction aggregates serve as a crucial foundation for ensuring the quality of buildings. As the key to producing high-quality construction...read more
-
Construction Waste Treatment EquipmentWith the acceleration of urbanization, construction decoration, demolition, and the building materials industry are continuously generating construction waste.read more
-
Primary Crushing Equipment Of The Building Aggregate Prod...Under the trend of high-quality development in the construction industry, as a core raw material for projects such as concrete and road bases, the production of construction aggregates places...read more
-
High-efficiency Hydraulic Gyratory CrusherPerformance Characteristics Lower Crushing Cost The crushing chamber with a large inclination angle and the long crushing surface endow the crusher with extremely high crushing capacity, and the...read more
-
PE Jaw CrusherFeed particle size: 125-1200mmread more
Discharge port adjustment: 10-350mm
Processing capacity: 1-1200t/h
Power: 7.5-132kw -
Single-cylinder Hydraulic Cone CrusherFeed inlet width: 150-300mmread more
Adjustment range of discharge port: 5-25mm
Processing capacity: 50-150t/h
Motor power: 15-160kw -
Multi-cylinder Hydraulic Cone CrusherFeed particle size: <267mmread more
Adjustment size of discharge port: 20-51mm
Processing capacity: 80-1000t/h
Power: 220-630kw -
Hydraulic Gyratory CrusherAs a flagship device in the field of hard rock primary crushing, the hydraulic gyratory crusher integrates gyratory motion and hydraulic technology, and is specifically designed for super-hard...read more
-
High-efficiency Vertical Shaft Sand Making MachineModel: YH-3000, YH-4000,YH-5000,YH-6000read more
Feed port size(mm): 45 to 70
Processing power(t/h): 30 to 550
Total weight of crusher(t): 18 to 40
Power (kw):30 to...
Compound Crusher. Applied Materials. It is mainly used for medium and small crushed cement raw materials and clinker. It is used for the crushing of other medium hard ores such as...
The compound coal crusher is mainly used in coal plants, coal mines, power plants, and other factories that process coal. It is a new type of crushing equipment that is suitable for crushing and...
Performance characteristics of compound crusher 1. High breaking rate and energy saving 2. Simple and reasonable structure, low running costs. Using the Principles of stone hitting stone, a small...
Compound crusher has big crushing ratio, the discharged size can be adjusted, not affected by the weariness of hammer board and the impact liner, Due to no screen bar setting, it can crush high...
Compound crusher can crush materials with not more than 140MPa compressive strength and not more than 15% humidity, which is applicable to the secondary or tertiary crushing in ore dressing industry,...
CB200 Crusher Backing Compound. Crusher Back is used for filling cavities between the upper part of crusher and outer jacket and between supporting cone and inner jacket in cone crushers. Typical...
